Handspray
Spray Holder
Supply
Hoses
3. Handspray Installation
Apply a bead of plumbers putty or other sealant to the underside
of the spray holder according to the manufacturer's instructions.
Insert the spray holder through the sink hole.
Hand tighten the nut to the spray holder from under the sink.
Remove any excess putty or sealant.
Position the faucet supply hoses to allow access for the handspray
hose connection.
Insert the handspray hose through the spray holder.
Attach the hose to the hose outlet.
Kohler Co.
Apply
plumbers
putty.
Sink
Handspray
Hose Outlet
Nut
Handspray
Hose
5
114681-2-BC