Wittur WSG-S1.2 Manual De Instrucciones página 70

j | BA 14.0197 | 11/2010
4 Mechanical installation
4.4.3 Check air gap
Fig. 9
1. Check the air gap "s
values to the values for "s
)
If "s " (^ 15) is not within the tolerance, readjust the air gap.
Lü
4.4.4 Air gap adjustment
}
Fig. 10 Air gap adjustment
26
Checking "s "
Lü
1.1 Stator
2 Armature plate
" near the screws (10) using a feeler gauge and compare the
Lü
Lürated
Note!
Do not insert feeler gauge more than 10 mm between armature plate (2) and
stator (1.1)!
Danger!
Disconnect voltage. The brake must be free of residual torque.
6 Flange
9 Sleeve bolt
" in the table (^ 15).
BFK46420_1_008.iso/dms
10 Cheese head screw
15 End shield
BFK464−XX−S−017.iso/dms