Siefken GD1020 Instrucciones De Uso página 41

3 YEARS
L I M I T E D WA R R A N T Y
WARNING: A closed, 2-sided cutting wheel guard is not included with this tool but is required when
using cutting wheels. Failure to use proper ange and guard can result in injury resulting from wheel
breakage and wheel contact.
Cut-o wheels are suited for small cut-o and shallow notching operations only. When using a
cut-o wheel, hold the tool as shown, using only the edge of the wheel.
WARNING: Using the face of a cut-o wheel (as in grinding) will cause the wheel to crack and break,
resulting in serious personal injury.
Using Wire Brushes (not included)
WARNING: Everyone in the area must wear protective clothing and safety goggles or face shields.
Fatigued wires and residue will y o the brush with considerable force, potentially causing serious
injury. Wire brushes are useful for removing rust, scale, burrs, weld slag, etc. Always install wire cup
brushes according to the accessory manufacturer's instructions.
WARNING: Because the wires on wire wheel brushes are directed toward the operator, a guard must
be used to protect the operator when fatigued wires break.
OPERATING INSTRUCTIONS
When using a wire wheel brush, install guard according to "Installing/Removing Accessories". Test
wheel for balance and loose or damaged wires by letting it spin for one minute before applying it to
the workpiece. During this time, no one should stand in front of or in line with the wheel.
15