7.
Connect the vacuum cleaner plug
into the rear socket of the unit.
CAUTION! Connect only the vacu-
um cleaner delivered with the unit.
Other vacuum cleaners or tools
can damage the unit (Fig. 6).
8.
Refill the water tank with tap water
(1 Fig.7).
CAUTION! Use only tap water,
never use any other substance
(Fig. 7)!
9.
If using chemical refill the chemical
tank (2 Fig. 8).
CAUTION! Use only products sug-
gested by manufacturer (Fig. 8).
10. If there is no power to the machine
check the fuse (A).
11. Unwind the cable and insert the
plug into the wall socket of a
suitable wiring system. Unless
otherwise stated the machine is
suitable for 120V-60Hz connection
(Fig. 9).
CAUTION! We will not be liable for
any damage caused by operating
conditions with voltages other than
required! Make sure that the plug
is grounded so as to avoid any
problems with the generator func-
tion (Fig 9).
09
A
A
A