GRAPHITE 58G025 Instrucciones De Uso página 6

TRANSLATION OF ORIGINAL MANUAL
EN
USB ADAPTER - LED FLASHLIGHT
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY
AND KEEP IT FOR FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
SAFETY NOTICES
• Repairs may be carried out only by persons whose qualifications have been
tested and found appropriate for the tasks, and confirmed with proper
certificates.
• Do not modify the flashlight in any way.
• Do not use the flashlight in places with gas explosion hazards.
• Do not point the light directly at eyes. This may cause temporary blindness,
and prolonged exposure can lead to permanent sight damage or even loss.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety
systems are used, nevertheless there is always a small risk of injuries at work.
Explanation of used symbols
1 2 3
6 7 8
1. Read instruction manual, observe warnings and safety conditions therein.
2. Keep the tool away from children.
3.
Protect against rain.
4.
Use indoors, protect from water and moisture.
5. Recycling.
6. Protection class 2.
7.
Segregated waste collection.
8.
Do not throw cells into fire.
9. Hazardous to water environment.
10. Do not allow to heat above 50°C.
DESIGN AND INTENDED USE
The adapter allows using energy accumulated in the battery to illuminate
workplace with integrated LED lamp, and to charge batteries of electronic
devices via USB port and the right connection cable.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing
pages of this manual.
1. Illumination (LED)
2.
Holder
3.
Light switch
4. USB port activate/deactivate switch
5. USB port activate/deactivate lamp
6. USB port
7.
Battery
8.
Battery lock button
9. LED diodes
10. Charger
11. Button for battery level indication
12. Battery level indicator (LED)
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
WARNING
PREPARATION FOR OPERATION
REMOVING AND INSERTING THE BATTERY
• Press the battery lock button (8) and slide out the battery (7) (fig. A).
58G025
4 5
50
9 10
• Insert charged battery (7) into the adapter holder, you should hear when
the battery lock button (8) snaps.
OPERATION / SETTINGS
SWITCHING ON / OFF THE FLASHLIGHT
Switching on – press the switch button (3).
Switching off – press the switch button (3) again.
USB ADAPTER
The USB adapter allows to charge external devices (e.g. phone, mp3 player)
via the USB port.
When charging external device observe the device manufacturer guidelines.
CHARGING WITH THE ADAPTER USB PORT
• Plug the USB cable to an external device.
• Plug the USB cable to the USB port (6) in the adapter.
• Press the USB port activate/deactivate switch button (4). The USB port
becomes active, which is indicated with the lamp (5) switching on, and the
adapter starts recharging the connected device (fig. D).
• To deactivate the USB port (and stop charging), press the USB port activate/
deactivate switch button (4) again. The lamp (5) will turn off.
If the USB port is activated, and there is no USB device connected for
charging, the USB port will be automatically deactivated after approximately
60 seconds.
Charging may be stopped automatically (USB port will be deactivated)
when the battery level is too low.
OPERATION AND MAINTENANCE
Remove the battery from the device before commencing any
activities related to installation, adjustment, repair or maintenance.
MAINTENANCE AND STORAGE
• Cleaning the device after each use is recommended.
• Do not use water or any other liquid for cleaning.
• Clean the tool with dry cloth.
• Do not use any cleaning agents or solvents, they may damage plastic parts.
• Always store the tool in a dry place, beyond reach of children.
• Store the device with the battery removed.
All defects should be repaired by service workshop authorized by the
manufacturer.
TECHNICAL PARAMETERS
RATED PARAMETERS
USB Adapter - LED Flashlight 58G025
Parameter
Battery voltage
Power
Number of diodes
Working temperature range
Output connectors
Weight without battery
Protection class
Year of production
ENVIRONMENTAL PROTECTION
Electrically powered products should not be disposed of with
household wastes, but should be utilised in proper recycling
centres. Obtain information on waste recycling from your seller or
local authorities. Used electric and electronic equipment contains
substances active in the natural environment. Unrecycled equipment
constitutes a potential risk for the environment and human health.
* The right to make changes is reserved.
"Grupa Topex Spółka z ograniczoną odpowiedzialnością" Spółka komandytowa with seat
in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa Topex) informs, that all copyrights to
this instruction (hereinafter Instruction), including, but not limited to, text, photographies,
schemes, drawings and layout of the instruction, belong to Grupa Topex exclusively and
are protected by laws accordingly to Copyright and Related Rights Act of 4 February 2004
(ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later
ammendments). Copying, processing, publishing, modifications for commercial purposes
of the entire Instruction or its parts without written permission of Grupa Topex are strictly
forbidden and may cause civil and legal liability.
6
Value
18 V DC
1 W
1
4°C ÷ 40°C
USB 5V DC 1,5A
0,11 kg
III
2019