Maintenance; Warranty - Elite IW440 Manual De Usuario

WARNING: Tighten the wheel nuts in the sequence outlined in Fig. 4 for 4 stud wheel patterns and Fig. 5 for 5 stud
wheel patterns. Following this sequence is extremely important to avoid potential distortion of the brake rotors
or drums.
7. Use a torque wrench to tighten all wheel nuts to the manufacturer's recommended torque. Follow the same
tightening sequence as noted above.
8. Once the wheel nuts have been tightened, lower the vehicle so the wheel is rmly in contact with the ground
and verify the torque of each wheel nut using a conventional torque wrench.

MAINTENANCE

GENERAL
WARNING: When servicing, use only identical replacement parts. Use of any other part may create a hazard or
cause product damage.
DO NOT use solvents when cleaning plastic parts. Plastics are susceptible to damage from various types of com-
mercial solvents and may be damaged by their use. Use a clean cloth to remove dirt, dust, oil, grease etc.
WARNING: Do not at any time allow brake uids, gasoline, petroleum-based products, penetrating oils, etc. to
come into contact with plastic parts. They contain chemicals that can damage, weaken or destroy plastic.
DO NOT abuse power tools. Abusive practices can damage the tool as well as the workpiece.
WARNING: DO NOT attempt to modify tools or create accessories. Any such alteration or modi cation is misuse
and could result in a hazardous condition leading to possible serious injury. It will also void the warranty.
LUBRICATION
All of the bearings in this tool are lubricated with a su cient amount of high-grade lubricant for the life of the unit
under normal conditions. Therefore, no further lubrication is required.
11
www.ELITETOOLS.co
Keep Working