LOTRONIC madison MAD-CENTER120 Manual Del Usuario página 7

Operating Instructions
Before starting the power, please connect the system properly according
1.
to the above chart. Make sure to connect the polarity correctly and tum
the volume button to minimum position.
Please tum input selector button to correct position and switch the unit
2.
on. After a few seconds, the amplifier is in normal working condition. Set
the volume to an adequate level and enjoy your music.
The power fuse is inside of the set. If it blows, it must be replaced by a
3.
trained technician. The new fuse must have the same specifications as the
original one.
If the LED is not bright once the system is switched on, the set is under
4.
abnormal condition. Switch the unit off and solve the problem. Turn
power on again.
Connection of BIuetooth: Press mode button on the top panel or on the
5.
remote control and select the Bluetooth input. Turn the Bluetooth function on
your equipment on (such as mobile phone) and search for a Bluetooth device.
The Bluetooth name is "MAD-CENTER", pair your mobile to "MAD-CENTER", and
connect it. Now you can play your music.
©Copyright Lotronic 2015