MADISON MAD-CENTER100 Manual Del Usuario página 6

The power fuse is inside of the set. If it blows, it must be replaced by a
3.
trained technician. The new fuse must have the same specifications as the
original one.
If the LED is not bright once the system is switched on, the set is under
4.
abnormal condition. Switch the unit off and solve the problem. Turn
power on again.
Connection of BIuetooth: Press mode button on the top panel or on the
5.
remote control and select the Bluetooth input. Turn the Bluetooth function on
your equipment on (such as mobile phone) and search for a Bluetooth device.
The Bluetooth name is "MAD-CENTER", pair your mobile to "MAD-CENTER", and
connect it. Now you can play your music.
Trouble-Shooting
If the product is not operating properly, make a check of the items in the table
below. If the problem persists, a malfunction may be assumed. Disconnect the
power immediately and contact the store where the unit was purchased.
©Copyright Lotronic 2016 MAD-CENTER100 6