MADISON MAD-CENTER100 Manual Del Usuario página 7

Problem
•
Insecure speaker lead
connection.
• Audio frequency input
No sound
terminal connected
improperly.
• Mains plug & AC jack
connection is insecure
•Volume control sets to
minimum.
•Speaker output not in right
position
Distortion
Specifications
Output power RMS
THD (at rated conditions)
S/N ratio (line in)
FM tuner
FM step
Impedance
Frequency response
Rated input level/impedance
Input voltage
Consumption
Dimensions
Net / Gross weight
The above specifications are for reference only.
Design and specifications are subject to change for improvement without prior
notice.
©Copyright Lotronic 2016
Causes
•The volume is too loud.
• Connect securely.
• Check the audio
frequency terminal.
• Connect the power
properly.
•Tum volume up to a
suitable level.
•Put the speaker output at
right position
50W @ 4 ohm
≤2% (40-20kHz)
≥75dB (A-weighted)
87.5 – 108MHz
0.1MHz
4 Ohm
50Hz – 20kHz
Line in: 500mV
220 – 240Vac 50/60Hz
≤50W
200 x 120 x 918mm
6.7kg / 7.4kg
MAD-CENTER100
Corrections
• Reduce volume.
7