Hoover DOMINO HVE32 Manual De Uso Y Mantenimiento página 21

Residual heat indicator
As long as the temperature of the burner remains high enough to cause
injury, the display corresponding to the burner shows the "H" symbol
(residual heat). This indication only disappears when there is no longer
any danger (at 60°C).
The display shows a "0" as long as the temperature remains below 60°C,
whereas it shows an "H" whenever the temperature exceeds 60°C.
To save energy, turn off the burner in advance, in order to exploit
the residual heat.
The residual heat indicator "H" is lost in the event of a mains
power cut lasting more than 3 seconds.
Turning off the cook top
The cook top can be turned off at any time by means of the on/off key (1).
3. Dual-circuit burners
Two burners can be equipped with a second circuit: for instance, the
burner is composed of a central disk and an outer ring. You can turn on
the central disk alone (fig. 4) or both elements (fig. 5). This enables you to
adapt the heated area to the size of the saucepan you are using.
Turning on a dual-circuit burner
1. The dual-circuit burner must be enabled (2).
The decimal point on the display for the burner concerned (13)
must also be on.
2. Select the required power setting (from 1 to 9).
3. Turn on the second circuit by means of the dual circuit key. (6).
The pilot light (10) relating to the burner concerned comes on; the second
circuit comes on together with the first.
Turning off the burner's second circuit
1. The dual-circuit burner must be on.
The decimal point on the display relating to the burner concerned
(13) must also be on.
2. Touch the dual-circuit key (6).
The pilot light (10) goes off and the second circuit on burner also goes off.
4. Locking the cook top functions
Locking the cook top functions
The whole appliance can be locked using the safety lock key (9), in order
to prevent any unintentional use. The function also serves as a child
safety device.
A pilot light indicates that the safety lock function has been enabled.
If the safety lock function is not disabled before turning off the
appliance, it will still be enabled when the cook top is turned on
again.
As long as the safety lock function is enabled, any action on the keys has no effect.
21