Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with lists. If
any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 45 minutes
Tools Required for Assembly: Phillips screwdriver and crescent or 9/16 in. wrench.
ASSEMBLY INSTRUCTIONS
1. Lay seat (A) on the shipping box during assembly to
protect it. Attach posts (D) to (A) using eye bolts (AA),
washers (HH) and nuts (BB). Hand tighten only. Complete
for both left and right sides.
NOTE: Opening for eye bolt should be facing down.
2. Place swing arms (C) on top of (D) as shown.
3. Attach (C) to (D) using screws (EE). Completely tighten
screws before inserting small buttons (FF). Complete this for
both left and right sides.
D
BB
AA
C
D
Back
C
EE
D
3
Fig. 1
A
Fig. 2
Fig. 3
HH
Front
Publicidad
Tabla de contenido
