Clearing A Learned Function; Clearing All Learned Buttons - Jasco RM24940 Manual De Instrucciones

Clearing A Learned Button
To clear a learned button sequence, use the procedure
below. Note: No functions may be stored under the
LEARN, SLEEP, CODE
SEARCH or any of the device
CODE
buttons.
SEARCH
1. Press and hold the CODE
INDICATOR
LIGHT
SEARCH button until the
INDICATOR LIGHT lights,
VCR TV
then release the CODE
SEARCH button. AUX (BLINK)
CD CBL/SAT
CBL
AUDIO•AUX
2. Press and release the desired
Mode button (TV, VCR,
CABLE, SAT, etc. . . ). The
SAT
DVD
INDICATOR LIGHT will blink
off once the button press is
accepted.
LEARN
3. Press and release the LEARN
button twice. The INDICATOR
LIGHT will light off once the
button press is accepted.
CODE
SEARCH
4. Press and release the CODE
SEARCH button and the
remote will return to original
operation mode. All learned
command functions under the
device are now cleared.

Clearing All Learned Buttons

This procedure will erase all learned functions in every
device mode. This step is rec­
ommended when attempting
CODE
SEARCH
any learning of a new func­
tion from a new remote.
INDICATOR
LIGHT
1. Press and hold the CODE
SEARCH button until the
LEARN
INDICATOR LIGHT lights,
then release the CODE
SEARCH button.
2. Press and release the
LEARN button twice. The
CODE
INDICATOR LIGHT will SEARCH
light off once the button press
is accepted.
3. Press and release the CODE SEARCH button and the
remote will return to original operation mode. All
learned command entries are now cleared.
5