Safety And Compliance Information; Safety Precautions - Rimage Producer P-IV 8200N Guia Del Usuario

Important Information

Safety and Compliance Information

This manual and the indications on the product allow proper and safe
operation. The indication marks below help protect you and other persons
from injury, and equipment from damage.

Safety Precautions

To ensure safety, read these precautions and familiarize yourself with their
meaning before using the equipment.
Warnings!
n
• The laser beam used by the CD/DVD Recorder is a Class 1 laser. Do not attempt to
open the recorder. An authorized technician should perform all service procedures.
• The laser beam used by the bar code scanner is a Class 2 laser and can be harmful
to the eyes. Do not attempt to open the scanner. An authorized technician should
perform all service procedures.
• Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiant exposure.
• Never use any optical instrument in conjunction with this unit. To do so will greatly
increase the hazard to your eyes.
Cautions:
n
• For continued protection against risk of fire, replace the fuse only with the same
type and rating. An authorized technician should perform all service procedures.
• Use only the supplied AC power cord, or use a safety agency approved power cord.
For applications outside North America, refer to the nearest Rimage office for
assistance in selecting a locally approved power cord.
• This product is designed for an office environment.
• The Professional 6200N, 7200N, and 8200N contain a lithium battery. There is a
risk of explosion if the battery is replaced by an incorrect battery. Dispose of the
old battery according to the manufacturer's instructions included with the battery
packaging.
2002543_A
For more information visit rimage.com/support
3