Descargar Imprimir esta página

Intended Use; Identification Plate - Wolf Garten LYCOS 40/600 H Set Manual De Instrucciones

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 87
Safety information
General safety instructions
¾ Spare parts must meet the requirements of
the manufacturer. Therefore, use only original
spare parts or those spare parts authorised by
the manufacturer. During replacement, always
observe the supplied fitting instructions, remove
the power pack in advance.
¾ Repairs must only be performed by a quali-
fied expert or workshop. Specialist workshop
addresses can be found on our website.
¾ This hedge trimmer is intended for the care of
hedges in private households. Due to dangers
posed to the body of the user or other persons,
the device must not be used for purposes other
than those intended.

Intended use

The hedge trimmer is intended solely for the cutting
of hedges and bushes with the following maximum
twig/branch thicknesses:
- 22 mm for devices with a 50 cm cutting blade
- 24 mm for devices with a 60 cm cutting blade
Any other use is classed as an unintended use.
The user is liable for any damage arising from unin-
tended use.
Incorrect/abnormal use
This hedge trimmer should not be used in public
facilities, parks, sports grounds, roads etc. nor in
agriculture or forestry.

Identification plate

Position
The identification plate is located on the casing of
the hedge trimmer.
Note
The label has the status of a certificate. It
must never be altered or obliterated.
Safety information
¾ Only use the power packs intended for this
purpose in power tools. Use of other power
packs can result in injuries and fires.
¾ Even if all safety and operating instructions
are heeded, there is always a residual risk of
injury and property damage. Always be con-
scious of this!
¾ Do not use the device if it is raining or there is
a risk of storms.
¾ Replace all worn or damaged information
signs on the device.
¾ Only use power packs and chargers approved
by the manufacturer. The designations of the
approved power packs/chargers are listed in the
enclosed EC Declaration of Conformity.
Structure
1 Guaranteed sound level
2 CE label
3 Manufacturer
4 Device group
5 Model name
6 Model number
7 Serial number
8 Power
9 Engine speed in rpm
10 Weight
11 Rated voltage, current type
12 Protection class / IP code
13 Disposal instruction
14 Year of manufacture
EN
21

Publicidad

loading

Este manual también es adecuado para:

Lycos 40/600 hLycos 40/500 hLycos 40/500 h set