Setting The Alarm - Tangent QUATTRO MKII Manual Del Usuario

< Set Time / Date
8. Press the SELECT button.
Set Time
14:03
9. Turn the TUNE knob until the hour setting is correct, then press the
SELECT button.
Set Time
15:03
10. Turn the knob until the minute setting is correct, then press the
SELECT button.
Time Set:
15:06
The display says Time Set with the new time shown beneath for 3 seconds, then
returns to the radio station display.

Setting the alarm

1. Press the ALARM button. (Note: if you make a mistake at any point,
press the BACK button to go back to the previous screen.)
2. Turn the TUNE knob until the display says <Set Alarms>.
< Set Alarms
3. Press the SELECT button.
1 OFF 00:00 Sunday>
<
4. Turn the knob to swap between <1>,<2>,<3>,<4>,<5> and <Disable
all> and press the SELECT button. If you choose <Disable all> then
the alarms will be turned off. The display says All Alarms disabled for 3
seconds, then returns to the radio station display.
All Alarms
disabled
5. If you choose one of the numbers between 1 and 5 then the display
enables you to set the time for the alarm.
Set Alarm
15:06
6. Turn the TUNE knob until the hour setting is correct, then press the
SELECT button.
>
>
18