3M PL300 Guía Rápida De Inicio página 5

3. Inserting the refill cartridge
Your printer comes with two 3M™ Portable Labeler Refill Cartridges.
Visit www.3m.com/electrical for information about purchasing
additional refill cartridges.
To insert the refill cartridge
Lift the cartridge cover to open the label
1.
compartment. See Figure 4.
Make sure the label and ribbon are taut
2.
across the mouth of the cartridge and that
the label passes between the guideposts. If
necessary, turn the spool clockwise to
tighten the ribbon.
Insert the cartridge and press gently until
3.
the cartridge is eased into place.
Make sure the two blue clips lock the
4.
cartridge in place. Refer to the label
on the cartridge.
Close the cover.
5.
To remove the cartridge
Lift the cartridge cover to open the compartment.
1.
Press the Eject button. The refill cartridge is automatically lifted.
2.
Replace the cartridge as described above.
3.
Lift
Figure 4
Eject
Button
3