Installation Of The Unit; Choosing The Installation Spot - FRIGOGLASS Easyreach Express HC Manual De Usuario

ENG
3.

Installation of the Unit

The Easyreach Express packing consists of a wooden pallet, a full body carton box, a plastic bag and
four e.p.s. blocks for the protection of the unit. Unpack the unit and remove it from the pallet.
Along with the unit, the following components should be found in the packaging:
•
Two metallic shelves
•
Four metallic beams for the shelf placement
•
Two plastic profiles for the shelves (optional)
•
Two price strips for the shelves (optional)
•
One metallic spacer
•
Two cross recessed pan head self tapping screws 4.8x13
•
This User Manual
3.1

Choosing the Installation Spot

The Easyreach Express is a unit that can be used indoors only. Therefore it should never be placed
outdoors.
16
EASYREACH EXPRESS HC is equipped with HC refrigerant, and
has been tested and proven to be safe according to related
standards.
All necessary actions for safe usage & maintenance of this
appliance are described in this manual. Read carefully before
using the appliance and follow all precautions included in this
manual.
To reduce the possibility of fire, this appliance must be installed
only by a suitably qualified person.
After unpacking, check the cabinet for any damage caused during
transportation. In the event of damage, please contact the forwarding
company.
Allow the merchandiser to stand upright for at least 1 hour prior to
connecting to the mains supply. This gives the oil time to run back to the
compressor after transit and installation.
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure they don't play with the
appliance.