Yamaha BEARTRACKER YFM250XP 2001 Manual Del Propietário página 272

1. Oil gallery bolt
1. Boulon de rampe de graissage
1. Tornillo del conducto de aceite
2. Cloth
2. Chiffon
2. Trapo
8-21
Oil pressure check
1. Put a cloth around the cylinder.
2. Slightly loosen the oil gallery bolt in the cylin-
der head.
3. Start the engine and keep it idling until oil be-
gins to seep from the oil gallery. If no oil
comes out after one minute, turn the engine
off so it will not seize and find the cause.
4. Start the engine and check the oil pressure.
5. After checking, tighten the oil gallery bolt to
the specified torque.
Tightening torque:
Oil gallery bolt:
7 Nm (0.7 m·kgf)
CAUTION:
_
Be sure to inspect the oil pressure after replac-
ing the engine oil.
_