Tabla de contenido
Publicidad
4.3. Press [ OK ] button to continue:
5. Diagnóstico OBDII
5.1. Leer códigos
Stored codes are also known as "hard codes" or "permanent codes". These codes cause the control
module to illuminate the malfunction indicator lamp (MIL) when an emission-related fault occurs.
Pending Codes are also referred to as "maturing codes" or "continuous monitor codes".
It indicates the problem that control module has detected during the current or last driving cycle, but
they are not considered seriously.
Pending Codes will not turn on the malfunction indicator light, and codes will be cleared from
memory if there is no failure during the following warm-up period
1) Use the UP/DOWN scroll button to select Read Codes from the Diagnostic Menu and press [OK].
If there are no Diagnostic Trouble Codes, the display
Publicidad
Tabla de contenido
