Moulinex PREP'MIX+ HT461 Manual Del Usuario página 14

If you feel resistance when tightening the rod it is not properly aligned. You should remove
EN
it completely and re-screw correctly.
• Select setting "0", disconnect the appliance and unscrew the handblender rod (N) by turning
anti-clockwise (Fig. 20).
STORAGE
Do not store your appliance in a humid environment.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK?
Check:
that it is plugged in correctly.
that the accessories are correctly locked.
The position of the speed selector (A2): turn it to position"0" and then select the desired speed again.
Your appliance still does not work? Contact an approved service centre (see list in last page of
this booklet).
END-OF-LIFE ELECTRICAL OR ELECTRONIC PRODUCTS
The packaging is comprised exclusively of materials that present no danger for
the environment and which may therefore be disposed of in accordance with
the recycling measures in force in your area. For disposing of the appliance
itself, please contact the appropriate service of your local authority.
Think of the environment first!
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.