Lamborghini Caloreclima CRM N Manual De Usuario página 80

Sliding Temperature - Curve parallel offset
Once the Compensation curve is set, it is possible to adjust the parallel offset of curves from 20 to 40 as shown in the following graphs:
External temperature
1. Press the button
for 3 seconds.
2. The display shows parameter CU.
3. Press the button .
4. The display shows parameter OF.
Press the buttons
in 1°C increments. By keeping the button pressed the value will change
rapidly.
5. Press any other button to exit the menu.
EN
80
/ to modify the parallel offset of curves
code 3541Z230 - Rev. 03 - 09/2021
External temperature