Promise Technology SUPERTRAK Guia De Inicio Rapido página 5

Step 2: Install the SuperTrak EX16350 Card
The SuperTrak EX16350 card fits into any available 3.3-volt PCI-Express X8 or
X16 slot.
1. Remove the cover of your system.
2. Remove the inside slot cover of an available PCI-Express X8 or X16 slot on
the motherboard.
3. Install the SuperTrak card into the open slot (above).
4. Fasten the SuperTrak card bracket to the system case (above).
5. Attach your system case's 2- or 4-pin LED cable to the LED connector on the
SuperTrak card (see page 7).
Step 2: Install the SuperTrak EX16350 Card
5