Tabla de contenido
Publicidad
12
15
18a
19a
6
2193025-12.indd 6
13
14
16
17
18b
19b
English
Before starting
12
Open the front cover on the machine and check
that the dust bag s-bag® and the motor filter are in
place. (See also Replacement of filter)
13
Open the back lid on the machine and check that
the exhaust filter* is in place.
3
Insert the hose into the hose handle until the
catches click to engage (press the catches to
release the hose).
14
Insert the hose until the catches click to engage
(press the catches to release the hose).
15
Attach the extension tubes* or telescopic tube* to
the hose handle and nozzle by pushing and twisting
together. (Twist and pull apart to dismantle.)
16
Extend the electric cable and connect it to the
mains. The vacuum cleaner is fitted with a cable
winder. Once the electric cable has been extended,
it stays in that position.
17
To rewind the cable, press the cord rewinder pedal.
The cable will then rewind.
18a Start the vacuum cleaner by rotating the power
control in the direction of the "Max" position. In-
crease suction power by rotating the control further
up to "Max" position. Stop the vacuum cleaner by
rotating in the opposite direction to "Off" position.
18b* Suction power can also be adjusted by using the
suction control on the hose handle.
19
Ideal parking position for pausing (19a) and (19b)
storing,
* Certain models only.
2/25/09 2:37 PM
Publicidad
Tabla de contenido
