Clock And Calendar - Wohler CDL 110 Manuel De Instrucciones

7.7 Clock and calen-
dar
Fig. 12: Setting clock and calendar (rtc:
real time clock)
Fig. 13: Setting the year
24 hour and 12 hour time displays are both avail-
able in this meter. Setting can be done in P3.0
mode.
Go from normal mode to P3.0 mode by doing the
following steps:
Press and hold SET in normal mode for three
•
seconds to enter P1.0 mode.
• Press ▲ in P1.0 mode twice to enter P3.0
mode for setting clock and calendar (Fig. 12).
Press SET to enter P 3.1 mode. Current year
•
will blink (Fig. 13). To change the month,
press ▲ or MIN/MAX▼.
Press SET to save the settings and enter P3.2
•
mode or press ESC to return to P3.0 mode
without saving.
In P3.2 mode the current month will blink. To
•
change the month press ▲ or MIN/MAX▼.
Press SET-key to save the settings and enter
•
P3.3 mode or press ESC to return to P3.0
mode without saving.
Setup
EN
43