Tabla de contenido
Publicidad
GB
REMOVING THE
OVEN DOOR
The oven door can be
removed quickly and easily.
To do so, proceed as
follows:
- Open the door fully.
- Lift the two levers shown
in fig.
- Close the door as far as
the first stop (caused by the
raised levers).
- Lift the door upwards and
outwards to remove it from
its mountings.
To replace fit the door, fit
the
hinges
mountings and lower the
two levers.
8
in
their
GB
INSTALLATION
INSTRUCTIONS
Flush fitting
The oven can be installed
under a work top or in a
cooking
column.
Figure
shows the installation di-
mensions.
Make sure that surrounding
materials are heat resistant.
Align the oven centrally
with respect to the side
walls of the units surround-
ing it and fix it in place
with the screws and Allen
screws provided.
Insert the bushings provided
in the holes in the face.
Use the four screws provided
to fasten the bushings to the
cabinet, taking care not to
over tighten and break the
bushing.
c
Publicidad
Tabla de contenido
