Packing And Transport; Electrical Connection - Sammic DM Serie Manual De Instrucciones

SAFETY MEASURES AND WARNINGS
a) This machine has been designed and
manufactured in strict compliance with
the prevailing severest regulations, using
state-of-the-art technology for optimum
performance.
b) We recommend that you should read all
parts of this manual carefully before using
the appliance.
c) Keep this instruction manual in a safe
place for future reference.
d) The electrical connections and initial
starting of the machine are to be carried
out by specialist staff only.
e) This machine should be used only by
qualified persons who are familiar with
these instructions and safety norms.
f) In case of labour turnover, make sure
every machine operator receives these ins-
tructions and adequate training.
g) The manufacturer declines all responsi-
bility for damage caused to people or pro-
perty due to any alteration of the machine
or its safety features.
h) This appliance should be used for its
intended purpose exclusively. Attempts to
use it for other purposes may be dange-
rous and the manufacturer shall assume
no liability for damages resulting from
improper use.
i) Never put your hands or fingers or any
object or utensil into the spaces that con-
tain moving parts.
j) Although this machine includes all neces-
sary safety systems, users should not wear
loose or trailing clothes, jewels, long hair
or anything which means a risk of injury if
caught by moving parts.
k) Both the machine and the working area
should be kept clean and dry at all times.
Do not expose the machine to atmospheric
elements.
l) Before washing the machine, disconnect
it from the mains.
m) When operating the machine, always be
extremely careful in order to limit the risk
of accidents due to inattention or inexpe-
rience.
n) Always check the product type, weight
and size are suitable for its processing.
Never introduce frozen food in the machi-
ne.
o) Users shall satisfy the age and experien-
ce requirements stipulated by law.
p) Keep the machine out of reach of chil-
dren.
q) Check electrical cables and components
for wear and good operating condition.
r) Never use this appliance beyond its rated
capacity.
EN
4
s) In case of failure, do not attempt to
repair the machine. Contact your local dea-
ler or an authorised repair shop.
APPLICATIONS AND USES
a) This kneader will mix dough for:
- Pizzas
- Pasta.
SAFETY DEVICES
m p
echanical rotections
The kneaders described in this manual
comply with Directives
91/368/EEC, 93/44/EEC and 93/68/EEC
on protections against mechanical risks.
Safety is provided by guards installed at all
dangerous points of the machine.
e p
lectrical rotections
Safety devices against electrical hazards
conform to Directives 73/23/EEC and
93/68/EEC as well as to the CENELEC EN
60335.2.64 standard.
A mechanically-operated microswitch will
shut down the kneader when the bowl
cover is opened. Additionally, the low vol-
tage circuit includes an electromagnetic
switch that will disconnect the machine
in case of a power failure. Under these
circumstances, the operator will have to
restart the machine manually.

PACKING AND TRANSPORT

p
acking
The kneader is supplied packed in a PVC
bag inside a strong cardboard box with
shock-absorbing sections to ensure safe
transport.
It is however recommended to inspect the
machine, immediately after unpacking, to
see if it has been damaged in transit.
INSTALLATION
s
peciFications For place oF installation
The place of installation of this machine
shall be free from explosion risks and have
a dust content not exceeding 0.03g/m3.
Besides, temperature and relative humidity
shall be within the following limits:
Operating temperature:
Storage temperature:
Relative humidity:
- 80% maximum at 20ºC
temperature.
- 50% maximum at a room tem-
perature from 20ºC to 60ºC.
The electrical connections and initial star-
ting of the machine are to be carried out by
our distributor or an authorised installer.
IMPORTANT! This machine's installation
89/392/EEC, and work place shall comply with the
current standards for accident prevention
and electrical safety.
Install the machine on a well-dimensioned,
flat, dry and stable surface, as far away as
possible from heat sources and water taps.
The manufacturer declines all responsibili-
ty for any damage, whether direct or indi-
rect, resulting from non-compliance with
these standards.

ELECTRICAL CONNECTION

Before connecting the appliance to the
mains, check the nameplate ratings, to
see if they are compatible with the mains
specifications. The machine has a power
cord with fitted plug for its connection to
a combined wall outlet-switch that must
include a safety cutout to protect the user
against accidental contacts or hazards due
to tampering with the machine. It is best
to remove the plug from the outlet when
the machine is not in use and at night. This
machine must obligatorily be earthed in
compliance with the regulations in force.
Earthing is to be made by a specialist.
The manufacturer shall not be liable for any
direct or consequential damage resulting
from non-compliance with these instruc-
tions.
Note : Three-phase power supply
Before connecting the machine permanent-
ly to a three-phase power supply, check
the direction of rotation of the bowl. Briefly
press the green 'start' button and the red
'stop' push-button at once (see page 14).
Verify if the bowl rotates in the direction
shown by the arrow it has on it (see page
14); otherwise, invert two of the three wires
(at the plug or at the wall outlet).
minimum 0ºC,
maximum +35ºC.
minimum 15ºC,
maximum +65ºC.
room