Trust ISDN 128 External Manual Del Usuario página 21

F5 9.600 bps for V.110
F6 19.200 bps for V.110
F7 38.400 bps for V.110
H Hung-up
I0 Product identification
I1 EPROM checksum
I3 Model function
I6 Version product name
O Go back to connection state from escape mode
Q0 Return response codes after command input (default)
Q1 Do not return response codes
Sr=n Set register value
This command is used to alter an internal "modem" register.
This command supports three different means of accessing S-
register values:
Decimal form: Sr=d
Sr?
Examples: S23=39
OK
S23?
39
OK
Hexadecimal form: Sr:=x - Set register "r" to hexadecimal
Examples:
Binary form:
Examples:
Communicator ISDN 128 External
-Set register "r" to decimal value "d".
-Display value of register "r" in decimal.
value "x"
Sr:? - Display register "r" in
hexadecimal.
S23:=E2
OK
S23:?
E2
OK
Sr:=x -Set register "r", bit "p", to binary
value "b"
Sr:? - Display register "r" in binary.
S23.?
17