Trust ISDN 128 External Manual Del Usuario página 25

S22 0-255 This register provides a "bit-map" of options for result
code usage.
0 -
64 -
112 -
S23 This register is bit-mapped to control baud rate and parity as
follows
Bit 0 - Not Used
Bits 3 - 1 - Baud rate
000 - 300 bps
001 - Use extended baud rate sets
010 - 1.200 bps
011 - 2.400 bps
100 - 4.800 bps
101 - 9.600 bps
110 - 19.200 bps
111 - 38.400 bps
Bits 4 - 5 - Parity
00 - Even
01 - Space
10 - Odd
11 - Mark/None
Bits 7 - 6 - Extended baud rates
00 - 57.600 bps*
01 - 78.400 bps
10 - 115.200 bps
11 - Use other baud rates noted in S24.
S24 This register is bit-mapped to control autobaud and extra baud
rates. The default is 192.
Bits 3 - 0 - Extra baud rates.
0000 -
0001 -
0010 -
0011 -
0100 -
0101 -
0110 -
0111 - 1111 - Reserved
Bit 4 - 6 - reserved
Bit 7 - Autobaud select
0 -
1 -
Communicator ISDN 128 External
Display CONNECT Message Only.
Display standard CONNECT Message.
Display Enhanced ISDN CONNECT
messages
7.200 bps
14.400 bps
28.800 bps
153.600 bps
230.400 bps
460.800 bps
921.600 bps
Disabled
Enabled
21