CAME RADIO COMMANDS Serie Manual De Instalación página 18

Radio frequency card
Plug in the radio-frequency card onto the electronic board AFTER CUTTING OFF THE MAIN POWER SUPPLY (or disconnecting
the emergency batteries).
N.B.: The electronic card recognises the radio-frequency card only when it is powered up.
Memorisation
Memorise the code onto the card, as follows:
1) Keep pressed the "PROG" button on the base board (the LED light flashes).
2) The transmitter button sends the code, and the LED will stay on to signal that memorisation was succesful.
N.B.: if you later wish to change code, repeat the described sequence.
QUADRO COMANDO
ZR24
AF card
Flashing LED
LED on