Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Installation instructions
1. Press the buttom on the bottom of the enclosure down and push out the main body.
2. Insert the SSD into the M.2 port of the unit. The SSD should now be angled upwards.
2. Insert the SSD into the M.2 port of the unit. The SSD should now be angled upwards.
3. Fix the SSD with the fastener:
3. Fix the SSD with the fastener:
A. Press down the SSD.
B. Mount the SSD by pressing the fastener into the notch of the enclosure.
4. Remove the protective fi lm from both sides of the thermal pad. Place the pad on the SSD.
4. Remove the protective fi lm from both sides of the thermal pad. Place the pad on the SSD.
Make sure the edges are even.
!
Please note: Once it has warmed up, the pad might stick to the SSD. If you want to
change the thermal pad, simply let it cool down and remove it carefully.
change the thermal pad, simply let it cool down and remove it carefully.
A
B
Publicidad
Tabla de contenido
