Grundig MGK 6841 Manual Del Usuario página 24

OPERATION_______________________________
3
Push the comb attachment carefully
and firmly onto the rounded rear half
of the cutting head from above and
let it click into place.
Note
To adjust the small and large adjust-
7
able comb attachments
press the middle of each attachment
and push it up or down.
4
Press the button
appliance and start trimming.
5
Press the button
appliance after use.
6 After use, remove the comb attach-
ment by pressing the locking tab at
the back and lifting the comb attach-
ment.
Thinning_out_hair
1 If necessary, remove the attachment
by holding the head and pushed
away from the appliance.
2
Insert attachment
attachment carefully at the top and
press down until it clicks into place.
B
3 Press the button to switch on the
appliance and start thinning out your
hair.
B
4 Press the button to switch off the
appliance after use.
24 ENGLISH
and
2
B
to switch on the
B
to switch off the
8
7 and put comb
Notes
Do not apply strong pressure when
7
shaving, as this could damage the
single blade foil.
You can remove the single blade
7
foil of the shaving attachment. To do
this, press both side catches on the
3
shaving attachment. Clean the blade
head with the cleaning brush sup-
plied.
Skin_close_cut_of_body_hair
Please use the head
1
If necessary, remove the attachment
by pressing in both side catches and
lifting off.
2
Insert attachment
top and press down until it clicks into
place.
3
Press the
appliance and start trimming your
body hair.
Notes
Do not apply strong pressure when
7
cutting, as this may cause skin injury.
Clean the head
7
brush supplied.
4
Press the
appliance after use.
8
.
8
carefully at the
B
button to switch on the
8
with the cleaning
B
button to switch off the