Publicidad
Enlaces rápidos
PULLOUT TOWEL HOLDER
TOOLS REQUIRED:
ESTIMATED ASSEMBLY TIME:
5 MIN
CARE AND MAINTENANCE:
Clean with a damp cloth and
wipe parts dry.
PARTS LIST
- (1) Towel Bar Assembly
- (4) Phillips Head Screws
STEP 1
Once you determine where
the towel holder will be
installed, lay the holder flush
against the wall with the front
of the slide facing the cabinet
opening. Use a level and mark
the (4) hole locations through
the slides.
STEP 2
(Fig.1) Lay the towel holder
over the (4) marked holes
from Step 1 and install with
the (4) Phillips head screws
provided. Once installed,
slide towel bar cover into
place. (Fig. 2)
FIG.
1
INSTALLATION INSTRUCTIONS: 563-51-C PULLOUT TOWEL HOLDER
12400 Earl Jones Way
Louisville, KY 40299
rev-a-shelf.com
Customer Service: 800-626-1126
FIG.
2
I-563-0518
Publicidad
Manuales relacionados para Rev-A-Shelf 563-51-C
Resumen de contenidos para Rev-A-Shelf 563-51-C
- Página 1 STEP 2 (Fig.1) Lay the towel holder over the (4) marked holes from Step 1 and install with the (4) Phillips head screws provided. Once installed, slide towel bar cover into place. (Fig. 2) INSTALLATION INSTRUCTIONS: 563-51-C PULLOUT TOWEL HOLDER I-563-0518...
- Página 2 Sostenga el carril sobre los agujeros marcados e instale el portatoallas con los cuatro tornillos de estrellas proporcionados en la bolsa de piezas. Maintenez la glissière positionnée sur les emplacements marqués et installez le porte-serviette avec les quatre vis cruciformes fournies dans le sachet. 1-800-626-1126 | rev-a-shelf.com I-563-0518...