Hohem iSteady X2 Manual Del Usuario página 7

➄ Navigation Buttons: Up/Down/Left/Right
Up/Down：
- Tilt Control （Indicator light shows green)
- Control the image zoom in/out
（Indicator light shows blue and only available in the app)
Left/Right: Pan Control
Pairing the remote control with the gimbal:
Please press the function button of the gimbal � times
once the gimbal is turned on, the bluetooth light will flash
alternatly in yellow and green and enter the pairing mode.
Make sure the gimbal is on the pairing
mode before turning on the remote
control to connect.
➅ Indicator Light
The indicator light shows green or blue in button
operation. If no light shows, it means the remote
control is not turned on or no battery.
Green light: Gimbal controlling
Blue light: Phone camera controlling
During the pairing process:
a. The pairing can be completed in � seconds, after
the gimbal bluetooth light stop flashing alternatly
in yellow and green;
b. If the remote control is not paired within ��
seconds, the pairing will be cancelled;
c. Click the function button to cancel pairing;
d. Double-click the function button to clear the
paired remote control and cancel pairing;
(And the paired remote control will be unavailable
and need to be re-paired)
EN ��