Descargar Imprimir esta página

Soleus Rise Fitness Band SF004 Manual De Instrucciones página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
SLEEP, WAKE UP, WINDOW
Rise has a sleep timer that will track your total sleep, light sleep, deep sleep and percentage of your sleep
goal.
Using the app settings you can set the sleep timer to start manually or automatically. If you choose the
AUTO setting, the timer will start automatically at the pre-designated time every night. The device will notify
you when the sleep timer starts.
To start the sleep timer manually:
Press the B2 button until you get to SLEEP mode.
Press and hold the B1 or B2 button to start the timer.
Note: when the sleep timer is running the sleep-face icon will appear on the screen.
To manually stop the sleep timer:
Press the B2 button until you get to SLEEP mode.
Press and hold the B1 or B2 button to stop the timer- the device will auto-scroll through your TOTAL, DEEP
and LIGHT sleep statistics.
Using the app settings, you can set a vibrating Wake Up alarm. Wake Up works with the AUTO or MANUAL
sleep timer setting.
There is also a Window feature that works in conjunction with Wake Up to wake you up naturally if your Rise
senses light sleep during the "window of time" prior to your Wake Up setting.
Note: Auto, Manual, Wake Up and Window can only be set in the SLEEP section in SETTINGS on the SOLEUS
GO! app.
MOVE TIME
Rise will tell you if you've been sitting still too long and need to "move". If it does not sense any movement
during your preferred time increment setting, Rise will vibrate and tell you to "MOVE". You control this
feature in the MOVE TIME section in SETTINGS on the SOLEUS GO! app.
WATER RESISTANCE
Rise is water resistant but has not been designed for water sports. Should it become completely submerged
in water, dry it with a clean, dry cloth before pressing any buttons. The buttons should never be pressed
while the device is submerged in water. Ensure that the charging pads on the back of the device are dry
before attaching the charging cable.
BRACELET D'ACTIVITÉ SOLEUS « RISE » (SF004)
Merci d'avoir choisi le bracelet d'activité Soleus Rise. Ce guide est destiné à vous aider à configurer et
utiliser votre appareil le plus rapidement possible. Pour consulter la toute dernière version du manuel
d'instruction complet, rendez-vous sur WWW.SOLEUSRUNNING.COM.
CHARGEZ LA PILE !
Il est recommandé de charger la batterie pendant 3 heures avant la première utilisation.
Alignez les broches sur le câble de chargement avec les plaquettes métalliques à l'arrière de l'appareil.
Enroulez la bande de retenue et fixez-la en position. Branchez le câble sur le port USB de votre ordinateur
ou de l'adaptateur secteur.
Dans des conditions normales d'utilisation, l'autonomie de la batterie complètement chargée est d'environ
15 jours. Il est recommandé de ne pas laisser la batterie se décharger à moins de 10 % avant de la
recharger.
UTILISATION CLASSIQUE
Bouton B1 : ce bouton sert à faire défiler vos activités et vos statistiques d'entraînement quotidiennes, à
démarrer et à arrêter les chronomètres et à activer et désactiver Bluetooth.
Bouton B2 : ce bouton sert à faire défiler chacun des modes, à démarrer ou à arrêter les chronomètres et
à activer et désactiver Bluetooth.
Si l'écran est éteint, il est possible de l'allumer en appuyant sur le bouton B1 ou B2.
TÉLÉCHARGEZ L'APPLICATION SOLEUS GO! SOLEUS GO!
L'appli SOLEUS GO! est disponible pour les smartphones iPhone et Android. L'appli SOLEUS GO! est
nécessaire pour configurer l'appareil et vous permet d'améliorer le suivi permanent de votre condition
physique. Pour plus d'informations sur l'appli SOLEUS GO!, rendez-vous sur WWW.SOLEUSRUNNING.COM et
téléchargez-la gratuitement dans l'App Store ou sur Google Play.
COUPLAGE DU RISE AVEC VOTRE SMARTPHONE
Après avoir téléchargé l'appli SOLEUS GO! vous pouvez coupler votre Rise avec votre smartphone.
Sur votre bracelet Rise :
Appuyez sur le bouton B1 ou B2 pour allumer l'écran (l'heure actuelle s'affiche sur l'écran).
Maintenez le bouton B1 ou B2 enfoncé jusqu'à ce que le mot PAIR et le code d'identification de l'appareil
apparaissent sur l'écran (PAIR clignote).
FRENCH

Publicidad

loading