Setting The Comfort Mode Temperature - Kingfisher E15LF1U Manual Del Usuario

SETTING THE COMFORT MODE TEMPERATURE

- The button runs between 2 and 8, setting the Comfort mode temperature
from 15°C to approximately 30°C.
What you need to do :
- Set the button to position 4: the red light comes on when
the set temperature is higher than the room temperature.
- If the room temperature exceeds the desired tempera-
ture, reduce the temperature setting until the red light
goes out.
- Wait at least one hour for the room temperature to stabi-
lise before adjusting the temperature setting again.
- If the room temperature does not reach the desired tem-
perature, increase the temperature setting.
- Wait at least one hour for the room temperature to stabi-
lise before adjusting the temperature setting again.
- When the temperature is right for you, set the tempera-
ture position once and for all.
Note : the room temperature depends on the temperature setting as well
as on the size and insulation of the room.
SELECTING FROST PROTECTION MODE
Frost protection mode is located on the temperature set-
ting button.
.
- Select a constant frost protection temperature of around
7°C.
9
Quick start