Safety 1st 49529 Guia Del Usuario página 7

Using Your Thermometer
To Take a Forehead Measurement:
1. Press and release the ON/OFF button. You will
hear one beep. All segments will be displayed
(Figure 1).
IMPORTANT: Press the Mode button to
select forehead measurement mode. Be sure
that an arrow is pointing at the forehead as
shown (Figure 2).
2. The result of the previous temperature
measurement will be displayed for 2 seconds
(Figure 2).
3. Wait for the hourglass icon to disappear, then
two beeps will be heard to indicate that the
thermometer is "ready to
measure".
4. Wipe away perspiration with a
dry towel.
5. Place the thermometer probe in
the center of the temple area
between the eye socket and the
hairline. Gently press it against
the temple and ensure good
contact with the skin is
maintained (Figure 3).
6. A temperature reading will be
displayed within 7 seconds*. One long beep will be heard to indicate
that measurement is complete and temperature will be displayed for
about 1 minute.
7. Press and release the ON/OFF button to turn the thermometer off.
NOTE: If you need to take another reading, wait two minutes before
taking another measurement. Thermometer will start in last mode used.
*Timing results may vary.
1
2
3
5