Novis 231446 Manual De Instrucciones página 2

12. Do not remove the plug from the socket by pulling the power cord;
do not remove the plug from the power socket with wet hands.
13. Never use defective parts.
14. Do not use the appliance outdoors.
15. Do not place the Novis Kettle on hot or wet surfaces and do not
operate the appliance near open flames.
16. Do not put your hands into the kettle while processing as this can
cause injuries or equipment damages.
17. Do not misuse the device for any other purpose than boiling water,
otherwise it may cause injuries or damage to the device.
18. Always disconnect the appliance from the supply if it is left
unattended.
19. If the kettle is overfilled, boiling water may be ejected.
20. The kettle is only to be used with the stand provided.
21. Warning: Avoid spillage on the connector
22. The heating element surface is subject to residual heat after use.
23. Do not remove the lid while the water is boiling
24. This appliance is intended to be used in household and similar
applications such as: Staff kitchen areas in shops, offices and other
working environments; Farm houses; By clients in hotels, motels and
other residential type environments; Bed and breakfast type
environments.
Keep these instructions for future reference.
2
Warning:
• Do not touch heating elements of the kettle during operation – it is dangerous.
• Avoid dropping or hitting of kettle, especially when filling it with water.
• When using the kettle, make sure that the lid (2) is closed tightly.
• Before removing the kettle from the base make sure that it is switched off.
Using the Unit for the first Time
• Before using the unit for the first time, remove all packing materials.
• Insert the power cord plug into the socket.
• Only for KTC1: You will hear a sound signal and the display (4) will switch on and the current
temperature inside the kettle will be indicated on the display (When water temperature is less than
30°C, screen shows "—").
• To fill the kettle with water take it off the base, open the lid (2) by pressing the lid opening button
(3).
• Fill the kettle with water till the max. mark on the water level scale, close the lid, place the kettle on
the base. Make sure that the lid (2) is closed tightly.
• Switch on the kettle by pressing the on/off switch (7).
• For KTC1: Press the on/off switch (7) for at least 2 seconds. The temperature setting will be 100°C.
Switch on the kettle by pressing the on/off switch (7) again.
• When water starts boiling, the kettle will switch off automatically. Pour out water and repeat boiling
procedure 2-3 times.
Novis Kettle K1 Usage
• Insert the power cord plug into the socket.
• To fill the kettle with water take it off the base, open the lid (2), by pressing the lid opening button
(3).
• Do not overfill the kettle (till the max. mark on the water level scale)
• Place the filled kettle on the base as convenient for you, as it allows unit 360°rotation.
• Switch on the kettle by pressing the on/off switch (8),
• The on/off switch (8) illumination will switch on.