Bang & Olufsen BeoVision Avant Serie Manual De Instrucciones página 7

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
2
Centre button
TV function
BeoRemote One
button
SOURCE LIST
RECORDINGS
SETUP
PROGRAMME GUIDE
CHANNEL LIST
INFORMATION
1
CHANNEL GROUPS
SUBTITLE LANGUAGE
2
AUDIO LANGUAGE
3
ACCESS CA MODULES
4
Example of main menu in English.
NICE TO KNOW menu
You must unscrew two transportation screws, one in each side, to unblock speaker movement before
you connect and switch on your television.
Use ,  ,   and  to navigate in television menus and in the BeoRemote One display. For example, you
can use  and  to turn the television if it is equipped with an optional motorised floor stand or wall bracket
or to change picture format. Press the centre button to confirm selections and settings in menus.
To back up through menus, press BACK.
To exit menus, press and hold BACK.
For more information, see the guide for your BeoRemote One remote control.
Bring up the main menu by pressing MENU while the television is on. You can also activate coloured
functions indicated in the main menu without pressing MENU first, but only if Digital Text/HbbTV is
disabled, see the online guide for more information.
Some menus take up more space than available on the television screen. This is indicated by half a menu
item at the bottom or top of the screen. To easily step from the top of a list to the bottom, press  .
Selection must be made using the centre button and you can edit settings using the arrow buttons
 and  .
If your television is equipped with the optional motorised floor stand or wall bracket, you can turn it
by means of the remote control. To use the motorised floor stand or wall bracket function, you have to
calibrate the stand or wall bracket first. You can also preset positions for the TV to turn to. If you have
a motorised table stand, you can set the television to tilt slightly. These functions are described in the
online guide.
To turn the television, press LIST on BeoRemote One and press  or  to bring up STAND
in the BeoRemote One display, press the centre button, then turn the television by pressing
 and  or the green and the yellow buttons.
WARNING! The television must not be lifted or otherwise moved physically as long as it is mounted on
the floor stand. Contact your retailer.
Help texts
In the SETUP menu, you can show/hide help texts using the INFO button. For some languages, help
texts are only available in English.
General features and functions are also explained in the NICE TO KNOW menu. Access the menu from
the SETUP menu. You can read about basic features and functions. When your television receives software
updates (requires Internet connection), new features and functions are explained there.
7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Beovision avant-55Beovision avant-75Beovision avant-85

Tabla de contenido