Cembre MG3 Manual De Uso página 7

4.6) Load media sheets for printing
A sheet of media comprises a number of identical moulded or die-cut blanks. Available in a variety of sizes, materials and colours to
suit all applications, the range of media is shown in the Cembre "IDENTIFICATION AND LABELLING SYSTEMS" catalogue.
Proceed to positioning the media sheet on the specifi c support template (See section 4.7).
4.7) Mount the support templates
Diff erent templates are supplied with MG3 to suit the range of printable media sheets .
Proceed as follows:
– Select the support template appropriate to the media sheet to be printed according to the table.
– Press the BLUE button (4) to open the carriage.
– Carefully position the template on the carriage, locating it correctly on the pins provided.
Positioning is identical for all versions of template (See FIG. A)
– Correctly locate on the template, a sheet of the medium to be printed (See sections 4.7.1 and 4.7.2).
PRINTABLE MEDIA:
MG-TPMF
cable tags for holders (serie FLAT)
MG-TPM
cable tags for holders
MG-TDM cable tags without holders
MG2-TDMO cable tags without holders
MG-ETF cable & conduit tags
MG-KMP
wraparound cable markers
MG-CPM
terminal block markers
MG-CPMF
terminal block marker strips
MG-VYB terminal block marker labels
MG-SPM component markers, push in
MG-TAP legends precut
MG-PTS
push button legends
MG-TAPW
legends 9 mm precut
MG-TAR
legends precut
MG-DOG
dog tags precut
MG-TAA self adhesive precut legends
MG-VYT self adhesive precut labels
MG-VCT
self adhesive precut labels
MG-PYT
self adhesive precut labels
MG-SAT
security labels
MG-PLC
PLC legends
MG-17.5
modular legends
MG-VRT
panel plates
MG-SIGNS
panel legends
FIG. A
4
Support templates each have a protective PET blank on their upper side.
If this needs to be replaced due to contamination, damage or wear, use only genuine Cembre spare parts.
Do not use a template without its protective blank.
MG2-PWC MG2-PLT MG2-QTB MG2-PTD MG2-PTM MG2-WTB MG2-STB MG2-CTB MG2-MTB MG2-LTB MG2-ETB MG2-PSP
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Supplied
3
2
1
4x12mm 4x16mm
•
• •
• •
Support templates available separately
Template
MG2-PLT
Locating pins corresponding to
apertures in the underside
Carriage fully open
. 7 .
• • • •
Template
MG2-PWC
of templates
•
•
Templates
MG2-QTB
MG2-LTB
MG2-WTB
MG2-STB
MG2-CTB
MG2-MTB
MG2-PTD
MG2-ETB
MG2-PSP