Watertank - ZACO A9s Manual Del Usuario

Z/\CO
HowTo Use

WaterTank

This product contains water tank components. After sweeping and vacuuming,
replace the dustbin with the water tank for mopping function.
• lf a cleaning cycle is paused for water refill or mop cloth cleaning, robot
0
will plan and start a new cleaning path. Completed areas may be
cleaned again. For best performance, mop one room at a time.
• Manually move robot to another room that requires mopping. Refill
water and clean the mop cloth, if necessary, before robot starts mopping.
• Do not use the water tank on carpet. To prevent mop cloth from staining
the carpet, roll up the carpet edges before mopping.
• Make sure there is enough water for mopping during cleaning. Refill water
when needed. Remove the water tank before a refill.
• Remove the water tank before charging.
0
Water Refill
Open the water inlet cap.
Slowly pour in water with a cup.
8
lnstall Water Tank
Press dustbin release button to
remove the dustbin and replace
with the water tank.
P18
8
Attach Mop Cloth
Close the cap tight and attach
the mop cloth firmly.
Secure with the rings on both sides.
0
Mopping
Press Auto button to start
mopping and vacuuming.
For more detailed information , p lease visit: www.zacorobot.eu
En g lish •