Testboy TB 55 Manual De Instrucciones página 20

Operations
Changing the batteries
Remove the tester cap (2). Use the
enclosed chip (4) or a suitable tool to
lift the battery compartment cover (3)
slightly and at the same time slide it
down and off. Remove the spent bat-
teries and insert new ones. Close the
compartment again.
When inserting the batteries, ensure
that the polarity is correct!
Do not dispose of batteries in
normal household rubbish!
Use an authorized local col-
lection point!
Technical specifications
Display
Dimensions
Batteries
Protection degree
Measuring range
20
Optical / 5 LEDs
L=151 mm / Ø=23.5 mm
Two 1.5-V AAA Micro
IP 40
DOT 3, DOT 4, DOT5.1
®
Testboy TB 55