Audio-Technica ATH-ES700 Guia De Inicio Rapido

Instructions
Thank you for purchasing these headphones. Before using these headphones,
please read through these operating instructions to ensure that you will use the
headphones correctly.
■ Headphone parts
Please confirm each part before using these headphones.
Slider
LEFT/ RIGHT
■ How to use
1. Minimize the volume of each sound device, then connect the
headphones to the headphone terminal.
2. Please make sure to position the earpads correctly (Left / Right
position and with the earpad covering the whole ear).
3. Turn on your audio device, and adjust volume as necessary.
※Please also read instruction manual of audio device.
■ Connection samples
1.2 m cord
■ Swivel mechanism
The housing folds flat.
* The swivel mechanism cannot turn more than 90 degrees.
Do not apply excess force when locking it.
Swivel
Headband
Earpad
Swivel
Arm
Housing
Bushing
φ3.5 mm gold-plated
stereo mini plug (L shaped)
Portable
audio players
Folded flat
LEFT
■ Cleaning
Get into the habit of regularly cleaning your headphones to ensure that
they will last for a long time. Do not use alcohol, paint thinners or other
solvents for cleaning purposes.
●Cleaning the headphones
To clean, wipe with attached cleaning cloth.
●Cleaning the cords
If the cords have become soiled (by perspiration, for instance), wipe
them with a dry cloth immediately after use. Using cords which are
dirty may cause them to deteriorate, become hard and give rise to
problems.
●Cleaning the plug
Using the plug when it is dirty may cause intermittent sound or noise.
When the plug is dirty, wipe it with a dry cloth.
●Cleaning the earpads and headband
To clean, wipe with a dry cloth. Earpads and headband may fade if sweat or
water dries on them. If the earpads get wet, we recommend wiping them
with a dry cloth and allowing them to dry in the shade.
●For long-time storage, keep the headphones in a well-ventilated place
without high temperatures and humidity.
●The earpads deteriorate over time due to use or storage. For information
about replacing headband pads or other parts, or for information about
other serviceable parts, contact your Audio-Technica dealer or service
center.
■ Specifications
Driver
Output sound pressure level ： 104 dB/mW
Frequency response
Maximum input power
Impedance
Weight
Plug
Cord length
Accessory
Sold separately earpads
(For product improvement, this product is subject to modification without notice.)
RIGHT
2013 Audio-Technica Corp.
PORTABLE HEADPHONES ATH-ES700
： Dynamic φ42 mm
： 5 〜 30,000 Hz
： 1,000 mW
： 56 Ω
： 160 g (Without cord)
： φ3.5 mm gold-plated stereo mini plug (L shaped)
： 1.2 m (Y type)
： Pouch, Cleaning cloth
： HP-ES700
技術システム
'13.02.25
山田
132414241