Tractive Hunters Edition Manual De Usuario página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
2. DEVICE ACTIVATION
Activation of the Tractive
the power button on the device pressed for around 3 seconds. Once you hear 2 short
ascending beeps and see a green light, the device has succesfully been turned on.
Holding the button again for 3 seconds will turn off the device.
Enter the link below into the address bar of your browser to access the Tractive
website, which will guide you through the step by step activation of your Tractive
GPS 2 device:
tractive.com/activate
3. DOWNLOAD TRACTIVE
The Tractive
GPS app will guide you through the first steps of adding a pet and
®
assigning a new Tractive
Note: After turning on the Tractive
of inactivity, it can take a few minutes until the device is ready to use. To speed up
this process, turn on the device and make sure it's placed under clear sky away from
buildings, trees and electrical towers.
4. ATTACHING TRACTIVE
Clip the Tractive
GPS 2 device on the collar of your pet by using the included clips. The
®
clips are made for different collars: use the one with an S at the back for collars with a
thickness up to 3 mm and the one with an L at the back for collars with a thickness up
to 5 mm.
4 / 44
GPS 2 device requires the device to be turned on. Keep
®
GPS APP
®
GPS 2 device to the pet.
®
GPS 2 device for the first time or after a period
®
GPS 2 TO A PET COLLAR
®
®
®

Publicidad

Tabla de contenido
loading

Tabla de contenido