Zyxel NWA1100-N Guia De Inicio Rapido página 11

Configure IP Settings
1. You need to set your NWA1100-N's IP address to be in the same
subnet as your network. Click IP in the navigation panel.
• Select Obtain IP Address Automatically if you want to have a
DHCP server on your network assign an IP address to the
NWA1100-N.
• If you have a specific IP address to use, select Use Fixed IP
Address and enter it along with the subnet mask and gateway IP
address.
• If your ISP provided specific DNS (Domain Name System)
settings, enter them in the System DNS Servers section.
Otherwise, leave these fields at their defaults.
• Click Apply. The NWA1100-N now uses the new IP settings; you
can no longer connect to the NWA1100-N using the default IP
address.
If you change the NWA1100-N's IP address, you must use the new IP address
when you next access the web configurator. If you select Obtain IP Address
Automatically, check your DHCP server to determine the IP address it assigns to
the NWA1100-N. Refer to your DHCP server's documentation for more information.
11