Getting Started; Powering On/Off; Selecting Modes - Denver IR-110 Guia De Inicio Rapido

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14

GETTING STARTED

Powering ON/OFF

1. When you first connect the unit to the mains socket, the unit will be in STANDBY
mode after showing "Welcome to Internet Radio STARTING...." (F.1)(F.2)
2. Press the Standby
3. Press the Standby
to standby on mode.

Selecting Modes

Press the MODE button repeatedly on the unit or remote control to switch between
Music player, DAB radio, FM radio, AUX In and Internet radio modes.
When the unit is idle for approximately 15 minutes, it will automatically switch to standby.
To switch the unit off completely, remove the mains plug from the main socket.
Please turn the unit off completely to save energy when not in use.
Network
1. During System Settings mode, press the / buttons to select Network and press the SELECT button to
confirm.
2. Press the / buttons to select from the following settings, and then press the SELECT button to confirm.
Network wizard
SSID – select the desire wireless network.
Rescan – Scan for available networks.
Wired – select wired network.
Manual config – select wired/wireless network with DHCP enable/disable.
PBC Wlan setup
Select PBC on the unit and press the PBC button on the modem device that you wish to
connect with. Press the SELECT button to continue.
View settings
Display the setting on the unit.
Wlan region
Select a country of your choice.
Manual settings
Select wired/wireless network with DHCP enable/disable.
NetRemote
To define a PIN number to be entered before being able to connect to the unit
PIN Setup
remotely over a network
Network profile
View the connected network.
Clear network
To delete the connected network memory in Network profile.
settings
Keep network
To define whether remains connected to its network in Standby mode and when not in
connected
Network radio mode. This is necessary for remote operation and audio streaming in Music
Player mode.
3. Press the BACK button on the unit or on the remote control to cancel the setting and return back to the
previous menu.
button on the unit or remote control to switch the unit on.
button on the unit or remote control to switch the unit back
ENGLISH
(F.1)
Welcome to
Internet Radio
STARTING
(F.2)
00/00/000
00 : 00

Publicidad

Tabla de contenido
loading

Tabla de contenido