Tabla de contenido

Publicidad

Product Use

Motion Lock
The motion lock provides continuous swaying for both
stages of use.
1
- Pull the motion lock up to unlock the seat. (13)
2
- Push the seat to sway. (14)
3
- To lock the seat and stop movement, push the motion
lock down. The seat will only lock in the center position.
(15)
4
- When transporting, lock the base and carry by holding
between the seat and the base. (16)
NEVER lift or carry baby while in this product.
11
LEAF grow instructions
Recline
1
- There are three recline positions. (17)
You MUST use the harness for stage one use.
The harness is not required for stage two use.
2
- ANY recline position can be used for stage two use. (18)
3
- To raise the recline, pull up on the top of the seat to
release the connection (19)-1.
4
- To lower the recline, press in on the recline adjustment
button (19)-2 and adjust the seat to the desired recline
position. A "click" sound means the recline position is
engaged.
Base
1
- To remove the seat from the base, insert a flat head
screwdriver into the slot on the back of the seat mount,
and press to disengage the connection. (20)
2
- Once the connection is disengaged, slide the seat off
the base mount. (21)
DO NOT detach the seat from the base by any other
method.
LEAF grow instructions
12

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Leaf grow

Tabla de contenido