Specifications - Sharp CD-BP90W Manual De Manejo

Specifications

As part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
„ General
Power source AC 220 - 240 V, 50/60 Hz
Power consumption 29 W
Dimensions Width: 270 mm (10-5/8")
Height: 300 mm (11-4/5")
Depth: 344 mm (13-1/2")
Weight 5.0 kg (11.0 lbs.)
„ Amplifier
Output power MPO: 16 W (8 W + 8 W) (10 % T.H.D.)
RMS: 10 W (5 W + 5 W) (10 % T.H.D.)
Output terminals Speakers: 3 ohms
Headphones: 16 - 50 ohms (recommended: 32 ohms)
„ CD player
Type 3-disc multi-play compact disc player
Signal readout Non-contact, 3-beam semiconductor laser pickup
D/A converter 1-bit D/A converter
Frequency response 20 - 20,000 Hz
Dynamic range 90 dB (1 kHz)
„ Tuner
Frequency range FM: 88 - 108 MHz
AM: 531 - 1,602 kHz
„ Cassette deck
Frequency response 50 - 14,000 Hz (Normal tape)
Signal/noise ratio 55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
Wow and flutter 0.3 % (WRMS)
„ Speaker
Type 10 cm (4") full-range speaker
Maximum input power 10 W
5 W
Rated input power
Impedance 3 ohms
Dimensions Width: 200 mm (7-9/10")
Height: 300 mm (11-4/5")
Depth: 165 mm (6-1/2")
Weight 2.1 kg (4.6 lbs.)/each
CD-BP90W
ENGLISH E-24