Wireless Settings; Wi-Fi ® Adapter Operations; Toshiba Wireless Adapter Application Settings - Toshiba STOR.E Manual Del Usuario

Settings
When the Toshiba Wireless Adapter application is not connected to the
Wi-Fi
of the Toshiba Wireless Adapter application. It currently supports Chinese
and English. The default language will be based on the country in which the
device was purchased.
When the Toshiba Wireless Adapter application is not connected to a
Wi-Fi
the Wi-Fi
settings.

Wireless Settings

Work mode: You can switch from AP to Bridge, (two kinds of work mode).
In AP mode, you can connect by a Wi-Fi
data located on the HDD. In Bridge mode, you can connect to the Toshiba
Wireless Adapter application through your mobile device while connecting
to the external Internet, so that you can surf the Web.
Update SSID: Update the Wi-Fi
Set password: Set a password for the Wi-Fi
adapter to restrict access to the HDD to strengthen the protection.
In addition AP/Station mode can also scan through the network to select
the AP/Station SSID.
Wi-Fi adapter operations
®
Safe Remove: Remove the HDD
Restart: Restart the Wi-Fi
Power off: Power off the Wi-Fi
Reset: Reset the Wi-Fi

Toshiba Wireless Adapter application settings

Application settings support language settings, and can clear the cache.
Switch the button to set the Breakpoint Play mode or the Continue Play
mode.
User's Manual
adapter through your mobile device, you can only set the language
®
adapter, obtain the wireless information and capacity information of
®
® adapter (factory default is AP mode), and create the following
®
Chapter 4
adapter and then browse the
®
adapter network name.
®
® adapter
adapter
®
adapter.
STOR.E WIRELESS ADAPTER
® network. Set the Wi-Fi ®
EN-21