TEFAL QUICKMIX HT312838 Manual De Instrucciones página 57

• Plug in the appliance:
- Your appliance has five speed levels and
a turbo button. Always begin mixing or
kneading at setting 1 initially, then move to
setting 2, 3, 4 or 5.
- To knead thick, heavy doughs we recommend
using setting 5 only.
- You can also increase the speed by pressing the
turbo button (A2): this function can be used at
all speeds. We recommend that it is only used
briefly (a maximum of 30 seconds for thick,
heavy doughs).
• After finishing, set the speed control (A1) to "0".
• Unplug the appliance.
• Then press the ejection button (A1) to remove
the whisks or mixers.
• To avoid overheating of the motor unit (A), do not
use the unit for more than 4 minutes.
• Rest 20 minutes before next operation.
• Always leave the appliance to cool down to room
temperature before next usage, otherwise, it may
overload and cause damage to the appliance.
• Using with the base (H): (According to model)
• Check that the speed control (A1) is set to "0".
• Insert the rod of each whisk (C) or dough hook
(E) into the corresponding holes and lock into
place. The whisks and dough hooks have a
specific shape, the mixer or whisk with the
marker for left whisk or dough hook (G) should
be positioned to the left, in the biggest hole
(Fig.1)
.
• Place the base (H) on a flat, stable, heat and
water resistant work surface away from water
splashes and sources of heat.
- To raise the arm, unlock by pressing on the
(Fig.3)
button (J)
- Position the bowl (I)
- Press on button (J) to unlock the arm and lower
(Fig.4).
it
- Place the motor unit (A), fitted with whisks (C)
or dough hooks (E), on the hinged arm until you
hear it click into place
.
(Fig.3)
.
(Fig.5)
.
Note:
INSERT THE MIXER
BY POSITIONING
THE WHISKS OR
DOUGH HOOKS
IN THE NOTCHES
(Fig.5)
EN
57