Tabla de contenido
Publicidad
Setting the intermediate position / third end point
With the JAROLIFT® TDEF radio motors, it is possible to set a so-called third end point in addition
to the end points / end positions UP and DOWN. The third end point serves as an intermediate po-
sition and can be used, for example, as a ventilation position with slightly opened light slots.
Setting/programming the intermediate position
1. Move the roller shutter to the desired position using the UP (or DOWN) button.
2. Stop the roller shutter using the STOP button.
3. Press the STOP button 4x.
The motor will confirm the programming of the intermediate position by vibrating
briefly.
UP or DOWN
Ventilation position /
To move to the intermediate position, press and hold the STOP button for approx. 5 seconds.
3rd end point
SETTINGS / PARAMÈTRES / AJUSTES / IMPOSTAZIONI / INSTELLINGEN /
4 x STOP
EINSTELLUNGEN
USTAWIENIA / AYARLAR
103
Publicidad
Tabla de contenido
